Due to the use of modern techniques the system offers
| · |
High luminous efficiency of > 100lm/W |
| · |
Daylight colour temperature of
5.600 to 6.000K
|
| · |
Flicker-free light, Modulation ± 1% |
| · |
High illuminance due to the BOOST-SYSTEM |
| · |
Stabilized power output, even when
mains varies
|
|
 |
|
The High-S-Light 4000/2500 Floor system was especially designed as a fill in light for crash tests and sled tests events. Past practical experience has shown that the head area inside the car and the lower body parts of the vehicle does not receive optimum illumination. This was carefully considered in the development of the High-S-Light 4000/2500 Floor system.
The new High-S-Light 4000/2500 Floor system provides the ability to direct additional light to areas where the main overhead lighting system cannot always cover sufficiently.
The spectral power distribution and illuminating characteristic of the new System High-S-Light 4000/2500 FLOOR fully meets with the existing HIGH-S-Light 4000/2500 BOOST line.
The essential components of the system are the Luminary, Electronic Power Supply and Control System. This system is completely compatible with the entire HIGH-S-LIGHT 4000/2500 product line. This means that existing systems can be upgraded and expanded easily (e.g. by utilizing existing plugstations).
Somit können auch bestehende Anlagen problemlos erweitert werden, z.B. durch Anschluß an vorhandene Steckplätze. Natürlich ist auch bei dieser Leuchte die Standby-BOOST Funktion gegeben und die Integration in die Versuchsablaufsteuerung gewährleistet.
This luminary also operates on Standby (50%) and BOOST (200%) mode and guarantees the integration into the overall test sequence.
Technical Information
Luminary/Lamp
| Power | High-S-Light 2500: 2500W (5000W)
High-S-Light 4000: 4000W (8000W) | | Colour temperatur | 5.600 to 6.000K | | Efficiency | 102lm/W (nominal) | | Average lifetime | 500h/1.500 starts | | Dimension | Ø 200 x 704mm | | Weight | approx. 20kg |
EPS-Module
| Mains | 400V 3PH/Neutral/Ground, 50Hz | | Operating conditions | 10 to 35°C | | Protective measures | open circuit control
current limit (max. 50A)
over temperature protection | | Output power | High-S-Light 2500: 1.200 to 5.000W
High-S-Light 4000: 2.000 to 8.000W
| | Fluctuation | t ± 1%
| | Shape of curve | square-wave, bipolar | | Light modulation | ± 1% | | Efficiency | 90% | | Dimension | 19“, 4HE, 480mm deep | | Weight | 24kg | |
Gerauer Straße 56a
64546 Mörfelden-Walldorf
Germany
Phone: +49 (0)6105 9128-6
Fax: +49 (0)6105 9128-80
www.khslight.com
|
