Due to the use of modern techniques the system offers
| · |
Acceleration resistance up to 80G |
| · |
High luminous efficiency of up to 100 lm/W |
| · |
Daylight colour temperature of
5.600 to 6.000K
|
| · |
Flicker-free light, Modulation ± 1% |
| · |
High illuminance due to the BOOST-SYSTEM |
| · |
Low heat radiation due to the spectral distribution of the lamp and the Standby Mode |
| · |
Stabilized power output, even when mains varies |
|
|
|
The HIGH-S-LIGHT 250G BOOST-SYSTEM is a special design to match the requirements of illumination for High-Speed Photography on-board of a crash test vehicle or on sled test applications. The Luminary is equipped with a 250W metal halide lamp and a special igniter to start the lamp.
The optical system is a parabolic reflector. Within this system the lamp could be mechanical adjusted in three steps (flood - medium - spot).
The characteristic colour temperature is 5.600 to 6.000K / Daylight. During its lifetime the lamp will loose about 1K/h on color temperature.
The average lifetime of the lamp is 250 hour or 800 starts.
The EPS-Modul 250, is an electronic power supply. It drives the lamp with square-wave current and controls the power. This reduces the modulation of the radiation to less than 1% and allows flicker free pictures. The EPS-Modul offers operation modes from 100% or 200% of the nominal lamp power. The 200% mode, the so-called BOOST, offers more than twice the light intensity for about 10 seconds. The 50% mode, the Standby, is used to reduce the heat radiation to the samples before the test is executed. Due to the reason that there is also a spectral shifting of the lamp at 50% power, the infrared portion will be reduced down to 30% at this mode.
The unit is also equipped with a cable length compensation switch, so to achieve the same light output for various distances. The ON/OFF and BOOST functions can be also controlled external.
Technical Information
Luminary/Lamp
| Power | 250W | | Colour temperatur | 5.600 to 6.000K | | Illuminance | 150.000 Lux Spot/20.000 Flood within 1m distance | Average lifetime of
the lamp | 250h/800 starts | | Dimension | 120x120x185mm (WxHxD) | | Weight | 2.2 kg |
EPS-Module
| Mains | 90-264V/47-63Hz 1PH/N/PE | | Operating conditions | 0 to +35°C no dew | | Protective measures | open circuit control
over temperature protection | | Output power | 250 to 500W | | Shape of curve | square-wave, bipolar | | Light modulation | ± 1% | | Efficiency | approx. 80% | | Weight | 2.2kg | |
Gerauer Straße 56a
64546 Mörfelden-Walldorf
Germany
Phone: +49 (0)6105 9128-6
Fax: +49 (0)6105 9128-80
www.khslight.com
|
